26th National Symposium on Cryogenics and Superconductivity

22-24 February 2017

VECC

Home > Author Index

Authors
a \| b \| c \| d \| e \| f \| g \| h \| i \| j \| k \| l \| m \| n \| o \| p \| q \| r \| s \| t \| u \| v \| w \| x \| y \| z \| [all]

A K, Sahu	93-Development and experimental studies on flexible transfer lines for liquid helium application

A, Lakshminarayanan	18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES 19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

ABRAHAM, Derick	43-NUMERICAL ANALYSIS OF MINIATURE COAXIAL STIRLING TYPE PULSE TUBE CRYOCOOLER WITH A MODIFIED RESERVOIR 108-Design of a Portable Dual Purpose Pulse Tube Cooler

AGARWAL, Jyoti	70-Large Pumping Speed Pump: To pump Space Simulators & Fusion Reactors 71-THERMOHYDRAULIC ANALYSIS OF HYDROFORMED THERMAL SHROUDS

AGRAWAL, Ankur	100-Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet and qualification at liquid nitrogen temperature

AHAMMED, Manir	187-OVERVIEW OF THE CRYOGENIC SYSTEM FOR VECC E-LINAC

AKHTER, Javed	102-Numerical Analysis of cool-down and warm-up of multipoles for Low energy beam line for FAIR 111-CFD Modeling of two-phase flow of cryogenic fluids in the Slug Flow regime in a Microchannel

ANDHALE, VILAS	12-Thermal Analysis and Investigations on Design Aspects of Aluminum alloy based Liquid Helium Dewar

ANSARI, M. S.	23-Design improvements in liquid helium transfer line for vertical test stand

ANTONY, Joby	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

ANTONY, Joby	62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi 109-Invited Talk (IT): CRYOGENIC INSTRUMENTS USING EMERGING ETHERNET TECHNOLOGY FOR INDIGENEOUS AUTOMATION NETWORK AT IUAC

ARUN KUMAR CHAKRABORTY, Arun Kumar	104-A prototype experiment on Cryocooler based Cryopump 105-Manufacturing and performance characterization of radiation shield baffle structure of a large area cryocooler based Cryosorption pump for INTF

ATREY, Milind	24-Development of Regression Model for the compressor of Mixed Refrigerant J-T cryocooler

ATREY, Milind	28-Cryogenic chill down phenomena in horizontal tube with liquid nitrogen 36-Effect of Cryogenic Temperature on Electrical Parameters of Copper Coil used in SMES 150-Invited Talk- IT: Multistage Pulse tube Cryocoolers

B, Nageshwar Rao	86-Development of a lab-scale YBCO based High-Tc Superconducting Power cable

B, Nitin	2-Optimization of the Performance of Injection Cooling System Using Genetic Algorithm 54-Structural and Thermal analysis of dewar supports for low boil-off long duration storage of cryogenic liquids

BABU, Suresh	89-CRYOGENIC HEAT ANAYLSIS OF LINAC CRYOMODULES

BADGUJAR, S.	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

BADGUJAR, Satish	57-Design of Nitrogen Cryolines for ITER 107-Dynamic study of flow in quench lines for ITER

BADGUJAR, Satish	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

BAHIRAT, Himanshu	36-Effect of Cryogenic Temperature on Electrical Parameters of Copper Coil used in SMES

BAIRAGI, Nitin	27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

BAISNAB, Dipak Kumar	26-Oscillation of Tc in Pr0.5Ca0.5MnO3/YBa2Cu3O7-δ Multilayer

BANDYOPADHYAY, Samit	188-Invited talk-IT: Experimental Demonstration of a 0.6MJ/3.4kW Superconducting Magnetic Energy Storage System based Dynamic Voltage Restorer

BANERJEE, R S	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

BASKARAN, R	26-Oscillation of Tc in Pr0.5Ca0.5MnO3/YBa2Cu3O7-δ Multilayer

BEHERA, A	129-EFFECTS OF CHARCOAL PARTICLE AND BED SIZE FOR DESIGN OF HELIUM GAS PURIFICATION SYSTEM AT 80 K FOR HELIUM PLANT

BEHERA, M	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

BEHERA, Suraj Kumar	9-Design of gas foil thrust bearing for vertically operated turboexpander used in cryogenic application

BEHERA, Upendra	93-Development and experimental studies on flexible transfer lines for liquid helium application 101-Studies on thermal conductivity of epoxy-aluminium composites in the range of 300 K to 4.5 K for the development of cryosorption pumps

BENKHEIRA, Lahcene	50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS

BG, Raghavendra	45-DESIGN AND DEVELOPMENT OF LOW CAPACITY TWIN BED SILICA GEL–WATER ADSORPTION REFRIGERATION SYSTEM

BHARADWAJ, Shri Harsha	77-Abrasion behaviour of cryogenic treated permanent moulded austempered ductile iron

BHATT, K.	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

BHATTACHARYA, ABHIK	110-Design, Development, Installation and Commissioning of Long distance Cryogenic transfer lines

BHATTACHARYA, R.	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

BHATTACHARYA, Ritendra	57-Design of Nitrogen Cryolines for ITER 107-Dynamic study of flow in quench lines for ITER 1-Optimized filling of a 5000 liter liquid helium dewar

BHATTACHARYA, Ritendra	29-INVESTIGATION OF CRYOGENIC SAFETY DISCHARGE EVENT OF MULTIPLE SYSTEMS TO A COMMON RELIEF HEADER 98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

BHATTACHARYA, Ritendra	50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS

BHATTACHARYYA, Pranab	32-Analysis on the effect of ullage space of Liquid helium chamber with Wall Heat Flux for K500 SCC

BHATTASANA, R	128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION

BHAVSAR, Hardikkumar	117-CFD ANALYSIS FOR FINDING AXIAL THERMAL CONDUCTION EFFECT INCRYOGENIC 2 - STREAM COUNTER FLOW PLATE FIN HEAT EXCHANGER

BHUIYA, Tapas	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

BHUNIA, Uttam	100-Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet and qualification at liquid nitrogen temperature 188-Invited talk-IT: Experimental Demonstration of a 0.6MJ/3.4kW Superconducting Magnetic Energy Storage System based Dynamic Voltage Restorer

BHUNIA, Uttam	178-Online quality factor measurement of the SRF cavity in Injector Cryo-Module of VECC Electron Linac

BIJU, T Kuzhiveli	66-MODELLING OF OSCILLATORY FLOW THROUGH REGENERATOR OF A STIRLING CRYOCOOLER USING A CORRELATION BASED METHOD

BISWAS, Sourav	22-Fabrication and characterization of micron size superconducting quantum interference devices (μ-SQUIDs) of lead (Pb)

BOHRA, D	128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION 130-THERMOHYDRAULIC AND PIPING FLEXIBILITY ANALYSIS FOR CRYOSTAT OF TEST FACILITY FOR TURBINES OF HELIUM PLANT

BOHRA, D	129-EFFECTS OF CHARCOAL PARTICLE AND BED SIZE FOR DESIGN OF HELIUM GAS PURIFICATION SYSTEM AT 80 K FOR HELIUM PLANT

BOKADE, Sanjay	35-Analysis of sintered porous regenerator of Stirling cryocooler using numerical technique

CHACKO, Jacob	89-CRYOGENIC HEAT ANAYLSIS OF LINAC CRYOMODULES

CHANDRAMOULI ROTTI, Chandramouli	104-A prototype experiment on Cryocooler based Cryopump 105-Manufacturing and performance characterization of radiation shield baffle structure of a large area cryocooler based Cryosorption pump for INTF

CHANG, Hyun-Sik	50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS

CHAUDHARI, Pritosh Kumar	97-Blade profile design of cryogenic turbine

CHAWDHURY, UK	123-Experimental Investigations on Power frequency Electrical Breakdown Characteristics of Liquid Nitrogen for HTS power devices 124-Design aspects of High Temperature Superconducting (HTS) Synchronous Motors - A Review

CHOPRA, Jatin	71-THERMOHYDRAULIC ANALYSIS OF HYDROFORMED THERMAL SHROUDS

CHOUDHARY, Anup	109-Invited Talk (IT): CRYOGENIC INSTRUMENTS USING EMERGING ETHERNET TECHNOLOGY FOR INDIGENEOUS AUTOMATION NETWORK AT IUAC

CHOUDHURY, Anup	89-CRYOGENIC HEAT ANAYLSIS OF LINAC CRYOMODULES

CHOUDHURY, Anup	10-Cryocooler based helium liquefier development- A practical usage 53-WARM UP CHARACTERIZATION AND OPTIMIZATION OF A SUPERCONDUCTING QUARTER WAVE RESONATOR CAVITY INSIDE A TEST CRYOSTAT.

CHOUKEKAR, K.	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

CHOUKEKAR, Ketan	107-Dynamic study of flow in quench lines for ITER

CHOUKEKAR, Ketan	57-Design of Nitrogen Cryolines for ITER 98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

CHOUKEKAR, Ketan	1-Optimized filling of a 5000 liter liquid helium dewar

CHRISTIAN, Dikens	17-Instrumentation and Control Aspects of MgB2 Current leads Test Activities 27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

CRYOGENIC TEAM, Cryogenic IPR	3-Overhauling of screw compressor for 1.3 kW/4.5 K capacity Helium Refrigeration / Liquefaction (HRL) Plant at IPR

DALAL, Biswajit	75-Magnetic properties of rare-earth orthochromites at low temperature 76-Magnetization reversal, exchange interaction, and switching behavior studies on Ru doped GdCrO3

DARSHAK SHAH, Darshak	104-A prototype experiment on Cryocooler based Cryopump

DAS, A	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

DAS, IPSITA	91-Minimization of AC loss in High Temperature Superconducting power cable with variable winding Pitches

DAS, Jotirmoy	50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS

DAS, Parnika	113-Design and characterization of a low noise amplifier operating at cryogenic temperature

DASH, Bikash	1-Optimized filling of a 5000 liter liquid helium dewar

DATTA, N	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

DATTA, Nirmalya	106-Development of Oil Removal Module for helium liquefier @50lph without LN2 precooling

DATTA, T S	112-A 4.2K to 400K control temperature cycling system and integration with automatic measurement algorithms of temperature vs electrical transport parameters

DATTA, Tripti Sekhar	89-CRYOGENIC HEAT ANAYLSIS OF LINAC CRYOMODULES

DATTA, Tripti Sekhar	56-AC CHARATERIZATION OF MODULAR HIGH TEMPERATURE SUPERCONDUCTING FAULT CURRENT LIMITER

DATTA, TRIPTI SEKHAR	60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET 61-ANALYSIS OF 3D-STRESS IN A 1.5 T SUPERCONDUCTING MRI MAGNET 62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi

DATTA, Tripti Shekhar	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

DATTA, Triptisekhar	59-STRESS ANALYSIS OF CRYOGENIC SUPPORT STRUCRTURE OF SUPERCONDUCTING MRI MAGNET CRYOSTAT

DATTA, Triptisekhar	109-Invited Talk (IT): CRYOGENIC INSTRUMENTS USING EMERGING ETHERNET TECHNOLOGY FOR INDIGENEOUS AUTOMATION NETWORK AT IUAC

DAVE, H	128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION

DE, Anirban	188-Invited talk-IT: Experimental Demonstration of a 0.6MJ/3.4kW Superconducting Magnetic Energy Storage System based Dynamic Voltage Restorer

DE, Subodh	75-Magnetic properties of rare-earth orthochromites at low temperature 76-Magnetization reversal, exchange interaction, and switching behavior studies on Ru doped GdCrO3

DEEPAK PARMAR, Deepak	104-A prototype experiment on Cryocooler based Cryopump

DESAI, ABHINAV	94-Experimental Investigations on high frequency thermoacoustic engine useful for driving a pulse tube cooler

DESAI, Keyur	34-NUMERICAL MODELLING AND ANALYSIS OF COILED FINNED TUBE HEAT EXCHANGER FOR HELIUM LIQUEFACTION PLANT

DESAI, Sonal	21-Theatrical and experimental evaluation of the thermal conductivity of perlite for cryogenic insulation (300K to 77K)

DEY, Malay Kanti	100-Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet and qualification at liquid nitrogen temperature

DIXIT, Avadhoot	13-Design and Development of Helium Gas Purifier

DIXIT, Tisha	67-A precursory analysis of cryogenic radiant coolers with open-cell metallic foam fins

DOOHAN, R.S.	47-Safety system assessment of cold box for large capacity helium liquefaction system

DOOHAN, Rajvir Singh	23-Design improvements in liquid helium transfer line for vertical test stand

DUBEY, Anshuman	5-Wear properties of Polytetrafluoroethylene (PTFE) at cryogenic temperatures

DUTT, Rajendra Nath	112-A 4.2K to 400K control temperature cycling system and integration with automatic measurement algorithms of temperature vs electrical transport parameters

DUTTA, Debashish	40-Dearman Engine in Data Centre Cooling 58-Pipe freezing - Rectification of Pipelines

DUTTA GUPTA, Anjan	32-Analysis on the effect of ullage space of Liquid helium chamber with Wall Heat Flux for K500 SCC 102-Numerical Analysis of cool-down and warm-up of multipoles for Low energy beam line for FAIR

DUTTA, ROHAN	85-Performance Analysis of Cryogenic CO2 Capture Methods employed in Post Combustion Systems

DUTTAGUPTA, Anjan	187-OVERVIEW OF THE CRYOGENIC SYSTEM FOR VECC E-LINAC

FARHEEN, Atiya	78-Low temperature magnetic properties of ferrimagnetic and ferroelectric composites

FRANCIS, ABEL	79-Study of Dual Bell Nozzle

G J, Bharath	93-Development and experimental studies on flexible transfer lines for liquid helium application

G, L.N.SRIKANTH	16-Design and fabrication of Vacuum Jacketed Transfer Line for Helium Services

G. L. N., Srikanth	27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

GANGRADEY, Ranjana	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K 101-Studies on thermal conductivity of epoxy-aluminium composites in the range of 300 K to 4.5 K for the development of cryosorption pumps

GANGRADEY, Ranjana	70-Large Pumping Speed Pump: To pump Space Simulators & Fusion Reactors 71-THERMOHYDRAULIC ANALYSIS OF HYDROFORMED THERMAL SHROUDS

GARDE, Aditya	30-Cryogenic setup for calibration of temperature sensors

GARDE, Chandrashekhar	30-Cryogenic setup for calibration of temperature sensors 65-Design, Analysis and Fabrication of Liquid Nitrogen Transfer-line.

GARG, Anuj	1-Optimized filling of a 5000 liter liquid helium dewar

GARG, Atul	15-Thermal Performance Enhancement of Liquid Nitrogen Distribution System of SST-1 27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

GAUR, Vikas	50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS 1-Optimized filling of a 5000 liter liquid helium dewar

GEHANI, Vijay	57-Design of Nitrogen Cryolines for ITER

GEHANI, Vijay	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

GEORGE, Paul	5-Wear properties of Polytetrafluoroethylene (PTFE) at cryogenic temperatures

GHOSH, Indranil	67-A precursory analysis of cryogenic radiant coolers with open-cell metallic foam fins 103-Cryosorption storage of hydrogen in activated carbon: finite element analysis

GHOSH, J	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

GHOSH, Koushik	111-CFD Modeling of two-phase flow of cryogenic fluids in the Slug Flow regime in a Microchannel

GHOSH, P S	131-CFD analysis of high speed cryogenic helium turboexpander with splitter blades

GHOSH, P. S.	153-Invited Talk: IT: "LNG TECHNOLOGY: PRESENT SCENARIO AND FUTURE POSSIBILITIES IN INDIA"

GHOSH, Parthasarathi	80-NUMERICAL MODELING OF CAVITATION IN CRYOGENIC FLUIDS USING OPENFOAM AND CFX 87-Numerical studies on turbine drive gas recovery at the LOX booster turbopump exit of a staged combustion cycle based rocket engine

GHOSH, Rupul	18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES 19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

GHOSH, S	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

GHOSH, Subrata Kr.	97-Blade profile design of cryogenic turbine

GHOSH, Sundeep	187-OVERVIEW OF THE CRYOGENIC SYSTEM FOR VECC E-LINAC

GHOSH, Tamal	100-Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet and qualification at liquid nitrogen temperature

GILANKAR, Shailesh	18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES 19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

GOUR, ABHAY	6-HTS based 400 mm level sensor for liquid Nitrogen 7-HTS level sensor with integrated Cold electronics 8-Capacitance level sensor with integrated Cold electronics 38-Design of 10 KA DC terminal connector for HTS cable 39-Design of magnetic shielding for 600 MWh SMES

GOYAL, Mukesh	137-Invited Talk-IT: "Turboexpander based helium liquefier/ refrigerator development at BARC, India"

GRILLOT, D.	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

GRILLOT, David	50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS 57-Design of Nitrogen Cryolines for ITER 107-Dynamic study of flow in quench lines for ITER

GRILLOT, David	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

GUPTA, Anjan K	22-Fabrication and characterization of micron size superconducting quantum interference devices (μ-SQUIDs) of lead (Pb)

GUPTA, Prabhat Kumar	73-Design and development of 2 Kelvin J-T heat exchanger

GUPTA, SUDEEP	74-DESIGN AND DEVELOPMENT OF A HIGH SPEED ROTARY VALVE FOR OPERATION IN A PRESSURE WAVE REFRIGERATOR

GUPTA, Sudeep Kumar	33-Application of thermoacoustic devices in cryogenic systems: A review since the year 2000

GUPTA, Sudeep	31-Design analysis and development of a thermoacoustic engine

H N, Nagendra	93-Development and experimental studies on flexible transfer lines for liquid helium application

H, Sudharshan	5-Wear properties of Polytetrafluoroethylene (PTFE) at cryogenic temperatures 39-Design of magnetic shielding for 600 MWh SMES

H., Sudharshan	7-HTS level sensor with integrated Cold electronics

H., Sudharshan	6-HTS based 400 mm level sensor for liquid Nitrogen 8-Capacitance level sensor with integrated Cold electronics 38-Design of 10 KA DC terminal connector for HTS cable

HARDIK SHISHANGIYA, Hardik	104-A prototype experiment on Cryocooler based Cryopump

HARIKRISHNAN, M	125-Design and analysis of a portable Free piston Stirling deep freezer

HARSH, Rajesh	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

HARSH, Rajesh	61-ANALYSIS OF 3D-STRESS IN A 1.5 T SUPERCONDUCTING MRI MAGNET

HARSH, Rajesh	59-STRESS ANALYSIS OF CRYOGENIC SUPPORT STRUCRTURE OF SUPERCONDUCTING MRI MAGNET CRYOSTAT 60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET 62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi

HATTI, Manjunath	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K

HEMANT, Naik	21-Theatrical and experimental evaluation of the thermal conductivity of perlite for cryogenic insulation (300K to 77K)

HIMANSHU PRAJAPATI, Himanshu	104-A prototype experiment on Cryocooler based Cryopump

HIMANSHU TYAGI, Himanshu	104-A prototype experiment on Cryocooler based Cryopump

HIREN MISTRY, Hiren	104-A prototype experiment on Cryocooler based Cryopump

J, Sundara Rajan	86-Development of a lab-scale YBCO based High-Tc Superconducting Power cable

JACOB, S.	6-HTS based 400 mm level sensor for liquid Nitrogen

JACOB THOMAS, RIJO	85-Performance Analysis of Cryogenic CO2 Capture Methods employed in Post Combustion Systems

JADHAV, Nishigandha	96-EFFECT OF THE COMPRESSOR DELIVERY PRESSURE ON THE COOLING CAPACITY OF THE HELIUM PLANT WITH MODIFIED CLAUDE CYCLE

JADON, M.	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

JADON, Mohit	57-Design of Nitrogen Cryolines for ITER 1-Optimized filling of a 5000 liter liquid helium dewar

JADON, Mohit	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER 107-Dynamic study of flow in quench lines for ITER

JAGTAP, Neeraj	103-Cryosorption storage of hydrogen in activated carbon: finite element analysis

JAIN, Abhishek	18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES 19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

JAIN, SV	126-FINDING HEAT TRANSFER FOR LOW TEMPERATURE HELIUM FLOW THROUGH PLATE-FIN HEAT EXCHANGER USING CFD SOFTWARE

JAIS, Jibi	55-Effect of cryogenic cooling on the cutting temperature, surface roughness and chip thickness in turning Aluminium 5083 alloy

JAYCHANDRA, Chaudharai	21-Theatrical and experimental evaluation of the thermal conductivity of perlite for cryogenic insulation (300K to 77K)

JOSHI, Bhumika	57-Design of Nitrogen Cryolines for ITER

JOSHI, Bhumika	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

JOSHI, KAUSHAL	114-Development of a test facility for measurement of performance of LN2 cooled prototype plate fin heat exchanger

JOSHI, S,C.	4-Detection of quench location in 1.3 GHz single cell SCRF Cavity during cold testing in LHe bath at 2K

JOSHI, S. K.	23-Design improvements in liquid helium transfer line for vertical test stand

K, AZHAR	83-Preliminary design and analysis of tripropellant rocket engine

K E, REBY ROY	115-Experimental investigations on chill down along packed spherical bed regenerator 116-Numerical investigations on the pressure drop characteristics along a compact regenerator

K N, Jayachandran	87-Numerical studies on turbine drive gas recovery at the LOX booster turbopump exit of a staged combustion cycle based rocket engine

K S, Bijukumar	79-Study of Dual Bell Nozzle

K. V., Srinivasan	30-Cryogenic setup for calibration of temperature sensors

KALKUNTE, Narasimha Murthy	77-Abrasion behaviour of cryogenic treated permanent moulded austempered ductile iron

KANJILAL, D	112-A 4.2K to 400K control temperature cycling system and integration with automatic measurement algorithms of temperature vs electrical transport parameters

KANZARIA, Hiren	57-Design of Nitrogen Cryolines for ITER

KANZARIA, Hiren	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

KAPOOR, H.	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

KAPOOR, Himanshu	57-Design of Nitrogen Cryolines for ITER 107-Dynamic study of flow in quench lines for ITER

KAPOOR, Himanshu	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER 1-Optimized filling of a 5000 liter liquid helium dewar

KAR, R	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

KAR, Ranjan	106-Development of Oil Removal Module for helium liquefier @50lph without LN2 precooling

KAR, Soumen	56-AC CHARATERIZATION OF MODULAR HIGH TEMPERATURE SUPERCONDUCTING FAULT CURRENT LIMITER 59-STRESS ANALYSIS OF CRYOGENIC SUPPORT STRUCRTURE OF SUPERCONDUCTING MRI MAGNET CRYOSTAT 60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET 61-ANALYSIS OF 3D-STRESS IN A 1.5 T SUPERCONDUCTING MRI MAGNET 62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi 68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE 89-CRYOGENIC HEAT ANAYLSIS OF LINAC CRYOMODULES 112-A 4.2K to 400K control temperature cycling system and integration with automatic measurement algorithms of temperature vs electrical transport parameters 186-Invited Talk IT: "DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE"

KARRI, Veerandra Yadav	33-Application of thermoacoustic devices in cryogenic systems: A review since the year 2000

KARRI, Veerandra Yadav	31-Design analysis and development of a thermoacoustic engine 74-DESIGN AND DEVELOPMENT OF A HIGH SPEED ROTARY VALVE FOR OPERATION IN A PRESSURE WAVE REFRIGERATOR

KARSHAN PRAJAPATI, Karshan	104-A prototype experiment on Cryocooler based Cryopump

KARTIK PATEL, Kartik	104-A prototype experiment on Cryocooler based Cryopump

KARUNANITHI, R.	38-Design of 10 KA DC terminal connector for HTS cable 39-Design of magnetic shielding for 600 MWh SMES

KASTHURIRENGAN, Srinivasan	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K 45-DESIGN AND DEVELOPMENT OF LOW CAPACITY TWIN BED SILICA GEL–WATER ADSORPTION REFRIGERATION SYSTEM 48-DESIGN, DEVELOPMENT AND STUDIES ON A LIQUID NITROGEN BASED CRYOSOPTION PUMP 49-DEVELOPMENT OF AN EXPERIMENTAL SETUP FOR EFFECTIVE THERMAL CONDUCTIVITY STUDIES OF INSULATIONS BETWEEN 77K AND 300K

KATHOLIL, Gireesan	20-Measurement of Magnetocardiogram in unshielded environment 99-Testing different pick up coil configurations for SQUID sensor based Magnetocardiography(MCG) and Magnetoencephalography (MEG) studies

KAUR, JASMEET	69-Low temperature magnetic properties of Cu-Zn ferrite thin films

KAUSHAL PANDYA, Kaushal	104-A prototype experiment on Cryocooler based Cryopump

KEYUR, Desai	21-Theatrical and experimental evaluation of the thermal conductivity of perlite for cryogenic insulation (300K to 77K)

KHAN, Fayas	20-Measurement of Magnetocardiogram in unshielded environment 99-Testing different pick up coil configurations for SQUID sensor based Magnetocardiography(MCG) and Magnetoencephalography (MEG) studies

KHARE, Prashant	18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES 19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

KHARE, Vipendra	100-Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet and qualification at liquid nitrogen temperature

KISHI, David	178-Online quality factor measurement of the SRF cavity in Injector Cryo-Module of VECC Electron Linac

KISHOR KUMAR, V V	66-MODELLING OF OSCILLATORY FLOW THROUGH REGENERATOR OF A STIRLING CRYOCOOLER USING A CORRELATION BASED METHOD

KOVESHNIKOV, Alexy	187-OVERVIEW OF THE CRYOGENIC SYSTEM FOR VECC E-LINAC

KRISHNACHANDRAN, C.	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K

KULKARNI, Swati	12-Thermal Analysis and Investigations on Design Aspects of Aluminum alloy based Liquid Helium Dewar

KULKARNI, Swati	13-Design and Development of Helium Gas Purifier

KUMAR, Aashish	112-A 4.2K to 400K control temperature cycling system and integration with automatic measurement algorithms of temperature vs electrical transport parameters

KUMAR, KAMLESH	82-Design the cold box of the helium liquefier / refrigerator

KUMAR, Manoj	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE 89-CRYOGENIC HEAT ANAYLSIS OF LINAC CRYOMODULES

KUMAR, Manoj	23-Design improvements in liquid helium transfer line for vertical test stand

KUMAR, Mukesh	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

KUMAR, Mukesh	59-STRESS ANALYSIS OF CRYOGENIC SUPPORT STRUCRTURE OF SUPERCONDUCTING MRI MAGNET CRYOSTAT 60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET 61-ANALYSIS OF 3D-STRESS IN A 1.5 T SUPERCONDUCTING MRI MAGNET 62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi

KUMAR, Rajesh	56-AC CHARATERIZATION OF MODULAR HIGH TEMPERATURE SUPERCONDUCTING FAULT CURRENT LIMITER 68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

KUMAR, RAJESH	60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET

KUMAR, Uday	57-Design of Nitrogen Cryolines for ITER 107-Dynamic study of flow in quench lines for ITER 1-Optimized filling of a 5000 liter liquid helium dewar

KUMAR, UDAY	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

KUMAR, Uday	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

KUMAR YADAV, Vipin	31-Design analysis and development of a thermoacoustic engine

KUNDU, B	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

KUNVAR S., Kunvar	104-A prototype experiment on Cryocooler based Cryopump

KUSH, P.K.	47-Safety system assessment of cold box for large capacity helium liquefaction system 73-Design and development of 2 Kelvin J-T heat exchanger

KUSH, Pradeep	18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES 19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

KUSH, Pradeep Kumar	23-Design improvements in liquid helium transfer line for vertical test stand

KUSHWAHA, Manoj	19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

KUZHIVELI, Biju	108-Design of a Portable Dual Purpose Pulse Tube Cooler

KUZHIVELI, Biju T	125-Design and analysis of a portable Free piston Stirling deep freezer

KUZHIVELI, Biju T	42-Effect of bottom heating on thermal stratification and self-pressurization in a cryogenic tank 43-NUMERICAL ANALYSIS OF MINIATURE COAXIAL STIRLING TYPE PULSE TUBE CRYOCOOLER WITH A MODIFIED RESERVOIR 51-Analysis and simulation of stratification in cryogenic storage tanks 83-Preliminary design and analysis of tripropellant rocket engine

KUZHIVELI, Biju T.	52-NUMERICAL INVESTIGATION OF INFLUENCE OF BLOWING RATIO ON FILM COOLING OVER A FLAT PLATE WITH BENT INJECTION HOLE

LADDHA, Yashwardhan	65-Design, Analysis and Fabrication of Liquid Nitrogen Transfer-line.

LAHCENE, B.	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

LATKAR, Swaroop	30-Cryogenic setup for calibration of temperature sensors

LAXDAL, R.E.	178-Online quality factor measurement of the SRF cavity in Injector Cryo-Module of VECC Electron Linac

LAXDAL, Robert.E.	187-OVERVIEW OF THE CRYOGENIC SYSTEM FOR VECC E-LINAC

MA, Yanyun	178-Online quality factor measurement of the SRF cavity in Injector Cryo-Module of VECC Electron Linac

MAHAWAR, Krishan Kant	23-Design improvements in liquid helium transfer line for vertical test stand

MAHESURIA, Gaurang	17-Instrumentation and Control Aspects of MgB2 Current leads Test Activities

MAHESURIYA, Gaurang	27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

MAHISHI, Chandan	5-Wear properties of Polytetrafluoroethylene (PTFE) at cryogenic temperatures

MAINAK BANDYOPADHYAY, Mainak	104-A prototype experiment on Cryocooler based Cryopump 105-Manufacturing and performance characterization of radiation shield baffle structure of a large area cryocooler based Cryosorption pump for INTF

MAITI, T K	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

MAITI, TRIJIT	82-Design the cold box of the helium liquefier / refrigerator

MAITI, TRIJIT KUMAR	106-Development of Oil Removal Module for helium liquefier @50lph without LN2 precooling

MALO, S	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

MAMGAIN, N	127-THERMOHYDRAULIC AND PIPING FLEXIBILITY ANALYSIS FOR CRYOSTAT OF TEST FACILITY FOR PLATE-FIN HEAT EXCHANDERS OF HELIUM PLANT 128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION 130-THERMOHYDRAULIC AND PIPING FLEXIBILITY ANALYSIS FOR CRYOSTAT OF TEST FACILITY FOR TURBINES OF HELIUM PLANT

MANDAL, A	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

MANDAL, Anupam	106-Development of Oil Removal Module for helium liquefier @50lph without LN2 precooling

MANDAL, RITESH	81-Development of MATLAB based dynamic model of the Helium Liquefier / Refrigerator

MANDLOI, Kuldeep	18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES

MANDLOI, Kuldeep	19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

MATHAD, Prafulkumar	45-DESIGN AND DEVELOPMENT OF LOW CAPACITY TWIN BED SILICA GEL–WATER ADSORPTION REFRIGERATION SYSTEM

MATHEW T, Paul	108-Design of a Portable Dual Purpose Pulse Tube Cooler

MEENA, Ramcharan	10-Cryocooler based helium liquefier development- A practical usage

MEHTA, JIGNESH	114-Development of a test facility for measurement of performance of LN2 cooled prototype plate fin heat exchanger

MEHTA, Shreya	34-NUMERICAL MODELLING AND ANALYSIS OF COILED FINNED TUBE HEAT EXCHANGER FOR HELIUM LIQUEFACTION PLANT

MESHRAM, A. V.	120-Parametric analysis of AC losses in HTS power cables

MILIND PATEL, Milind	105-Manufacturing and performance characterization of radiation shield baffle structure of a large area cryocooler based Cryosorption pump for INTF

MILINDKUMAR PATEL, Milindkumar	104-A prototype experiment on Cryocooler based Cryopump

MISHRA, Arpit	80-NUMERICAL MODELING OF CAVITATION IN CRYOGENIC FLUIDS USING OPENFOAM AND CFX

MISHRA, jyoti shankar	70-Large Pumping Speed Pump: To pump Space Simulators & Fusion Reactors

MONDAL, Manas	187-OVERVIEW OF THE CRYOGENIC SYSTEM FOR VECC E-LINAC

MUHAMMED, Anshad D.	49-DEVELOPMENT OF AN EXPERIMENTAL SETUP FOR EFFECTIVE THERMAL CONDUCTIVITY STUDIES OF INSULATIONS BETWEEN 77K AND 300K

MUKERJEE, Samiran	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K

MUKHERJEE, A	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

MUKHERJEE, ABANI	82-Design the cold box of the helium liquefier / refrigerator

MUKHERJEE, Abanindra	106-Development of Oil Removal Module for helium liquefier @50lph without LN2 precooling

MUKHERJEE, samiran	70-Large Pumping Speed Pump: To pump Space Simulators & Fusion Reactors 71-THERMOHYDRAULIC ANALYSIS OF HYDROFORMED THERMAL SHROUDS

MUKHJERJEE, Poulomi	92-Application of Superconducting Magnetic Energy Storage for Transient Stability Improvement of Power System

MURALIDHAR BATHULA, VAS	123-Experimental Investigations on Power frequency Electrical Breakdown Characteristics of Liquid Nitrogen for HTS power devices 124-Design aspects of High Temperature Superconducting (HTS) Synchronous Motors - A Review

MURALIDHARA, Srinivasa	50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS

MURALIDHARA, Srinivasa	29-INVESTIGATION OF CRYOGENIC SAFETY DISCHARGE EVENT OF MULTIPLE SYSTEMS TO A COMMON RELIEF HEADER 1-Optimized filling of a 5000 liter liquid helium dewar

MURTHY, Mahesh	45-DESIGN AND DEVELOPMENT OF LOW CAPACITY TWIN BED SILICA GEL–WATER ADSORPTION REFRIGERATION SYSTEM

N C, Shivaprakash	93-Development and experimental studies on flexible transfer lines for liquid helium application 101-Studies on thermal conductivity of epoxy-aluminium composites in the range of 300 K to 4.5 K for the development of cryosorption pumps

NABHIRAJ, P Y	0-Test Abstract

NADIG, Durgesh	5-Wear properties of Polytetrafluoroethylene (PTFE) at cryogenic temperatures

NAGIMOV, R.	178-Online quality factor measurement of the SRF cavity in Injector Cryo-Module of VECC Electron Linac

NAIK, Hemant	34-NUMERICAL MODELLING AND ANALYSIS OF COILED FINNED TUBE HEAT EXCHANGER FOR HELIUM LIQUEFACTION PLANT

NAIK, Rekhya	84-Development of cryostat for calibration of cryogenics temperature sensors

NAIK, Shivaraju	52-NUMERICAL INVESTIGATION OF INFLUENCE OF BLOWING RATIO ON FILM COOLING OVER A FLAT PLATE WITH BENT INJECTION HOLE

NAIK, Vaishali	178-Online quality factor measurement of the SRF cavity in Injector Cryo-Module of VECC Electron Linac 187-OVERVIEW OF THE CRYOGENIC SYSTEM FOR VECC E-LINAC

NAIK, Vaishali	133-Invited Talk- IT: PRESENT STATUS OF SUPERCONDUCTING ELECTRON LINAC AT VEC

NANDI, Chinmay	100-Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet and qualification at liquid nitrogen temperature 187-OVERVIEW OF THE CRYOGENIC SYSTEM FOR VECC E-LINAC

NANDI, Chinmay	102-Numerical Analysis of cool-down and warm-up of multipoles for Low energy beam line for FAIR 111-CFD Modeling of two-phase flow of cryogenic fluids in the Slug Flow regime in a Microchannel 170-Invited Talk-IT: Design status of Energy Buncher Magnets for FAIR

NANDI, S	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

NANDI, Tapas Kumar	33-Application of thermoacoustic devices in cryogenic systems: A review since the year 2000 74-DESIGN AND DEVELOPMENT OF A HIGH SPEED ROTARY VALVE FOR OPERATION IN A PRESSURE WAVE REFRIGERATOR

NANDI, Tapas kumar	31-Design analysis and development of a thermoacoustic engine

NANDY, Sushanta	106-Development of Oil Removal Module for helium liquefier @50lph without LN2 precooling

NAYAK, Pratik	70-Large Pumping Speed Pump: To pump Space Simulators & Fusion Reactors

NAYAK, Saurav	56-AC CHARATERIZATION OF MODULAR HIGH TEMPERATURE SUPERCONDUCTING FAULT CURRENT LIMITER

NAYAK, SOUMYA	72-Design and analysis of Methane pump

NIMAVAT, Hiren	17-Instrumentation and Control Aspects of MgB2 Current leads Test Activities 27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

NIMAWAT, Hiren	15-Thermal Performance Enhancement of Liquid Nitrogen Distribution System of SST-1

PACHIMBARE, ANIKET	25-Design and development of LN2 subcooler for TIFR Mumbai

PAL, Sandip	106-Development of Oil Removal Module for helium liquefier @50lph without LN2 precooling 187-OVERVIEW OF THE CRYOGENIC SYSTEM FOR VECC E-LINAC

PAL, SANDIP	81-Development of MATLAB based dynamic model of the Helium Liquefier / Refrigerator 82-Design the cold box of the helium liquefier / refrigerator 111-CFD Modeling of two-phase flow of cryogenic fluids in the Slug Flow regime in a Microchannel 179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC 165-Invited Talk-IT- " Process Instrumentation and Control for Cryogenic System of VECC"

PANCHAL, Paresh	70-Large Pumping Speed Pump: To pump Space Simulators & Fusion Reactors

PANCHAL, Pradip	17-Instrumentation and Control Aspects of MgB2 Current leads Test Activities 27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

PANCHAL, Rohit	27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

PANCHAL, Rohitkumar	17-Instrumentation and Control Aspects of MgB2 Current leads Test Activities

PANDA, UMASHANKAR	81-Development of MATLAB based dynamic model of the Helium Liquefier / Refrigerator 106-Development of Oil Removal Module for helium liquefier @50lph without LN2 precooling

PANDA, Umashankar	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

PANIGRAHI, SRIDHAR	72-Design and analysis of Methane pump

PANJWANI, Rajkumar	57-Design of Nitrogen Cryolines for ITER

PANJWANI, Rajkumar	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

PARIMITA SWAIN, Pragyna	20-Measurement of Magnetocardiogram in unshielded environment 99-Testing different pick up coil configurations for SQUID sensor based Magnetocardiography(MCG) and Magnetoencephalography (MEG) studies

PARMAR, Darshit	24-Development of Regression Model for the compressor of Mixed Refrigerant J-T cryocooler

PATEL, Ashish	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

PATEL, D	130-THERMOHYDRAULIC AND PIPING FLEXIBILITY ANALYSIS FOR CRYOSTAT OF TEST FACILITY FOR TURBINES OF HELIUM PLANT

PATEL, Hemant Kumar	47-Safety system assessment of cold box for large capacity helium liquefaction system

PATEL, J M	129-EFFECTS OF CHARCOAL PARTICLE AND BED SIZE FOR DESIGN OF HELIUM GAS PURIFICATION SYSTEM AT 80 K FOR HELIUM PLANT

PATEL, JAL	16-Design and fabrication of Vacuum Jacketed Transfer Line for Helium Services

PATEL, Jayant	27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

PATEL, Ketan	27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

PATEL, KETANKUMAR	16-Design and fabrication of Vacuum Jacketed Transfer Line for Helium Services

PATEL, Mr. Jayant Patel	3-Overhauling of screw compressor for 1.3 kW/4.5 K capacity Helium Refrigeration / Liquefaction (HRL) Plant at IPR

PATEL, Mr. Ketan Patel	3-Overhauling of screw compressor for 1.3 kW/4.5 K capacity Helium Refrigeration / Liquefaction (HRL) Plant at IPR

PATEL, Pratik	1-Optimized filling of a 5000 liter liquid helium dewar

PATEL, Pratik	29-INVESTIGATION OF CRYOGENIC SAFETY DISCHARGE EVENT OF MULTIPLE SYSTEMS TO A COMMON RELIEF HEADER 50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS

PATEL, Rajesh	117-CFD ANALYSIS FOR FINDING AXIAL THERMAL CONDUCTION EFFECT INCRYOGENIC 2 - STREAM COUNTER FLOW PLATE FIN HEAT EXCHANGER

PATEL, Rajesh	20-Measurement of Magnetocardiogram in unshielded environment 99-Testing different pick up coil configurations for SQUID sensor based Magnetocardiography(MCG) and Magnetoencephalography (MEG) studies

PATEL, Rakesh	17-Instrumentation and Control Aspects of MgB2 Current leads Test Activities 27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

PATEL, Sanket	34-NUMERICAL MODELLING AND ANALYSIS OF COILED FINNED TUBE HEAT EXCHANGER FOR HELIUM LIQUEFACTION PLANT

PATEL, V	128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION

PATEL, V B	130-THERMOHYDRAULIC AND PIPING FLEXIBILITY ANALYSIS FOR CRYOSTAT OF TEST FACILITY FOR TURBINES OF HELIUM PLANT

PATEL, VB	127-THERMOHYDRAULIC AND PIPING FLEXIBILITY ANALYSIS FOR CRYOSTAT OF TEST FACILITY FOR PLATE-FIN HEAT EXCHANDERS OF HELIUM PLANT

PAUL, Sagar	22-Fabrication and characterization of micron size superconducting quantum interference devices (μ-SQUIDs) of lead (Pb)

PINTO, Samson Paul	45-DESIGN AND DEVELOPMENT OF LOW CAPACITY TWIN BED SILICA GEL–WATER ADSORPTION REFRIGERATION SYSTEM

POKALE, Rahul	35-Analysis of sintered porous regenerator of Stirling cryocooler using numerical technique

PRADHAN, Jedidiah	100-Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet and qualification at liquid nitrogen temperature

PRADHAN, SUBRATA	16-Design and fabrication of Vacuum Jacketed Transfer Line for Helium Services 17-Instrumentation and Control Aspects of MgB2 Current leads Test Activities

PRADHAN, Subrato	37-SCIENTIFIC SOFTWARE TOOL FOR CALCULATION OF STATIC HEAT LEAK AND MATERIALS SPECIFIC HEAT FOR CRYOGENIC APPLICATIONS

PRAJAPATI, D	129-EFFECTS OF CHARCOAL PARTICLE AND BED SIZE FOR DESIGN OF HELIUM GAS PURIFICATION SYSTEM AT 80 K FOR HELIUM PLANT 130-THERMOHYDRAULIC AND PIPING FLEXIBILITY ANALYSIS FOR CRYOSTAT OF TEST FACILITY FOR TURBINES OF HELIUM PLANT

PRAJAPATI, D	128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION

PRAKASH, Om	23-Design improvements in liquid helium transfer line for vertical test stand

PRAKYATH, Arun mudya	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K

PRAMANIK, P	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

PUNTAMBEKAR, Avinash	4-Detection of quench location in 1.3 GHz single cell SCRF Cavity during cold testing in LHe bath at 2K

PURWAR, Gaurav	15-Thermal Performance Enhancement of Liquid Nitrogen Distribution System of SST-1 27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

R I, VIVEK	115-Experimental investigations on chill down along packed spherical bed regenerator 116-Numerical investigations on the pressure drop characteristics along a compact regenerator

R., Karunanithi	6-HTS based 400 mm level sensor for liquid Nitrogen 7-HTS level sensor with integrated Cold electronics 8-Capacitance level sensor with integrated Cold electronics

RAJMOHAN, RANJITH	88-THERMODYNAMIC STUDY OF MINIATURE ROTARY INTEGRAL STIRLING CRYOCOOLER

RAMALINGAM, Rajinikumar	180-Optical based Cryo-compatible long range displacement sensor

RANJINI, Menon	0-Test Abstract

RAO, V. V.	38-Design of 10 KA DC terminal connector for HTS cable 39-Design of magnetic shielding for 600 MWh SMES

RAO, V. Vasudeva	91-Minimization of AC loss in High Temperature Superconducting power cable with variable winding Pitches

RAO, V.V.	92-Application of Superconducting Magnetic Energy Storage for Transient Stability Improvement of Power System 123-Experimental Investigations on Power frequency Electrical Breakdown Characteristics of Liquid Nitrogen for HTS power devices

RAO, V.V.	120-Parametric analysis of AC losses in HTS power cables 121-REVIEW ON POSITIONING OF HTS FAULT CURRENT LIMITERS IN AN ELECTRIC POWER GRID 122-Superconducting Magnetic Energy Storage for improving the performance of Wind Energy conversion systems

RAO, VV	124-Design aspects of High Temperature Superconducting (HTS) Synchronous Motors - A Review

RATHOD, TUSHAR	94-Experimental Investigations on high frequency thermoacoustic engine useful for driving a pulse tube cooler

RATNAKAR YADAV, Ratnakar	104-A prototype experiment on Cryocooler based Cryopump

RAUT, Pranoti	36-Effect of Cryogenic Temperature on Electrical Parameters of Copper Coil used in SMES

REZA, Ashif	113-Design and characterization of a low noise amplifier operating at cryogenic temperature

ROY, Anindya	100-Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet and qualification at liquid nitrogen temperature

ROY, Arnab	80-NUMERICAL MODELING OF CAVITATION IN CRYOGENIC FLUIDS USING OPENFOAM AND CFX 87-Numerical studies on turbine drive gas recovery at the LOX booster turbopump exit of a staged combustion cycle based rocket engine

ROY, K E Reby	55-Effect of cryogenic cooling on the cutting temperature, surface roughness and chip thickness in turning Aluminium 5083 alloy

S B, Vishnu	42-Effect of bottom heating on thermal stratification and self-pressurization in a cryogenic tank 51-Analysis and simulation of stratification in cryogenic storage tanks 51-Analysis and simulation of stratification in cryogenic storage tanks

S, Kasthurirengan	93-Development and experimental studies on flexible transfer lines for liquid helium application 101-Studies on thermal conductivity of epoxy-aluminium composites in the range of 300 K to 4.5 K for the development of cryosorption pumps

S S, Udgata	93-Development and experimental studies on flexible transfer lines for liquid helium application

SAGAR, A. K.	23-Design improvements in liquid helium transfer line for vertical test stand

SAGAR, Pankaj	6-HTS based 400 mm level sensor for liquid Nitrogen 7-HTS level sensor with integrated Cold electronics 8-Capacitance level sensor with integrated Cold electronics 38-Design of 10 KA DC terminal connector for HTS cable 39-Design of magnetic shielding for 600 MWh SMES

SAHA, Pritam	2-Optimization of the Performance of Injection Cooling System Using Genetic Algorithm

SAHOO, RANJIT	72-Design and analysis of Methane pump 96-EFFECT OF THE COMPRESSOR DELIVERY PRESSURE ON THE COOLING CAPACITY OF THE HELIUM PLANT WITH MODIFIED CLAUDE CYCLE

SAHOO, Ranjit Kumar	9-Design of gas foil thrust bearing for vertically operated turboexpander used in cryogenic application 79-Study of Dual Bell Nozzle

SAHOO, Ranjit Kumar	56-AC CHARATERIZATION OF MODULAR HIGH TEMPERATURE SUPERCONDUCTING FAULT CURRENT LIMITER

SAHU, A K	128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION

SAHU, A K	129-EFFECTS OF CHARCOAL PARTICLE AND BED SIZE FOR DESIGN OF HELIUM GAS PURIFICATION SYSTEM AT 80 K FOR HELIUM PLANT 130-THERMOHYDRAULIC AND PIPING FLEXIBILITY ANALYSIS FOR CRYOSTAT OF TEST FACILITY FOR TURBINES OF HELIUM PLANT

SAHU, AK	126-FINDING HEAT TRANSFER FOR LOW TEMPERATURE HELIUM FLOW THROUGH PLATE-FIN HEAT EXCHANGER USING CFD SOFTWARE 127-THERMOHYDRAULIC AND PIPING FLEXIBILITY ANALYSIS FOR CRYOSTAT OF TEST FACILITY FOR PLATE-FIN HEAT EXCHANDERS OF HELIUM PLANT

SAHU, Ananta	95-INDIGENOUS DEVELOPMENT OF kW CLASS HELIUM REFRIGERATOR-CUM-LIQUEFIER: PRESENT STATUS AND FUTURE PLAN 96-EFFECT OF THE COMPRESSOR DELIVERY PRESSURE ON THE COOLING CAPACITY OF THE HELIUM PLANT WITH MODIFIED CLAUDE CYCLE 114-Development of a test facility for measurement of performance of LN2 cooled prototype plate fin heat exchanger

SAHU, Anantkumar	117-CFD ANALYSIS FOR FINDING AXIAL THERMAL CONDUCTION EFFECT INCRYOGENIC 2 - STREAM COUNTER FLOW PLATE FIN HEAT EXCHANGER

SAHU, Santosh	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

SAHU, Santosh	10-Cryocooler based helium liquefier development- A practical usage 53-WARM UP CHARACTERIZATION AND OPTIMIZATION OF A SUPERCONDUCTING QUARTER WAVE RESONATOR CAVITY INSIDE A TEST CRYOSTAT.

SAHU, Sontosh	89-CRYOGENIC HEAT ANAYLSIS OF LINAC CRYOMODULES

SAIGIRIDHARI, Anurag	65-Design, Analysis and Fabrication of Liquid Nitrogen Transfer-line.

SAIKIRAN, P	128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION

SAINI, S.K.	62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi

SAM, Ashish Alex	131-CFD analysis of high speed cryogenic helium turboexpander with splitter blades

SANDILYA, Pavitra	2-Optimization of the Performance of Injection Cooling System Using Genetic Algorithm 54-Structural and Thermal analysis of dewar supports for low boil-off long duration storage of cryogenic liquids

SARANGI, Sunil Kumar	9-Design of gas foil thrust bearing for vertically operated turboexpander used in cryogenic application

SARKAR, B.	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

SARKAR, Babusona	75-Magnetic properties of rare-earth orthochromites at low temperature 76-Magnetization reversal, exchange interaction, and switching behavior studies on Ru doped GdCrO3

SARKAR, Biswanath	50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS 57-Design of Nitrogen Cryolines for ITER 107-Dynamic study of flow in quench lines for ITER

SARKAR, BIswanath	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

SARKAR, Maalika	121-REVIEW ON POSITIONING OF HTS FAULT CURRENT LIMITERS IN AN ELECTRIC POWER GRID

SATHE, Chinmay	65-Design, Analysis and Fabrication of Liquid Nitrogen Transfer-line.

SAYYED, Arsalan	65-Design, Analysis and Fabrication of Liquid Nitrogen Transfer-line.

SELVAN, SATHISH KUMAR	110-Design, Development, Installation and Commissioning of Long distance Cryogenic transfer lines

SENTHILNATHAN, Sengottuvel	20-Measurement of Magnetocardiogram in unshielded environment 99-Testing different pick up coil configurations for SQUID sensor based Magnetocardiography(MCG) and Magnetoencephalography (MEG) studies

SHAFI, K.A.	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K 48-DESIGN, DEVELOPMENT AND STUDIES ON A LIQUID NITROGEN BASED CRYOSOPTION PUMP 49-DEVELOPMENT OF AN EXPERIMENTAL SETUP FOR EFFECTIVE THERMAL CONDUCTIVITY STUDIES OF INSULATIONS BETWEEN 77K AND 300K

SHAH, B V	128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION 130-THERMOHYDRAULIC AND PIPING FLEXIBILITY ANALYSIS FOR CRYOSTAT OF TEST FACILITY FOR TURBINES OF HELIUM PLANT

SHAH, Bhagyashri	117-CFD ANALYSIS FOR FINDING AXIAL THERMAL CONDUCTION EFFECT INCRYOGENIC 2 - STREAM COUNTER FLOW PLATE FIN HEAT EXCHANGER

SHAH, BHAGYASHRI	114-Development of a test facility for measurement of performance of LN2 cooled prototype plate fin heat exchanger

SHAH, BV	126-FINDING HEAT TRANSFER FOR LOW TEMPERATURE HELIUM FLOW THROUGH PLATE-FIN HEAT EXCHANGER USING CFD SOFTWARE 127-THERMOHYDRAULIC AND PIPING FLEXIBILITY ANALYSIS FOR CRYOSTAT OF TEST FACILITY FOR PLATE-FIN HEAT EXCHANDERS OF HELIUM PLANT

SHAH, N.	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

SHAH, Nitin	57-Design of Nitrogen Cryolines for ITER 107-Dynamic study of flow in quench lines for ITER 1-Optimized filling of a 5000 liter liquid helium dewar

SHAH, Nitin	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

SHAH, Pankil	27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

SHAH, PANKILKUMAR	16-Design and fabrication of Vacuum Jacketed Transfer Line for Helium Services

SHARM, P	126-FINDING HEAT TRANSFER FOR LOW TEMPERATURE HELIUM FLOW THROUGH PLATE-FIN HEAT EXCHANGER USING CFD SOFTWARE

SHARMA, R.G.	134-Invited Talk- IT: Discoveries of New Superconductors – A Golden Touch

SHARMA, Rajiv	15-Thermal Performance Enhancement of Liquid Nitrogen Distribution System of SST-1 27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

SHARMA, Ram Gopal	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

SHARMA, Ram Gopal	59-STRESS ANALYSIS OF CRYOGENIC SUPPORT STRUCRTURE OF SUPERCONDUCTING MRI MAGNET CRYOSTAT 60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET 61-ANALYSIS OF 3D-STRESS IN A 1.5 T SUPERCONDUCTING MRI MAGNET 62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi

SHARMA, Rishi Kant	73-Design and development of 2 Kelvin J-T heat exchanger

SHK, Madeena	1-Optimized filling of a 5000 liter liquid helium dewar

SHOBHIT TRAPASIYA, Shobhit	104-A prototype experiment on Cryocooler based Cryopump

SHUKLA, Ashish	28-Cryogenic chill down phenomena in horizontal tube with liquid nitrogen

SHUKLA, Ashish Kumar	47-Safety system assessment of cold box for large capacity helium liquefaction system

SHUKLA, Vinit	50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS 1-Optimized filling of a 5000 liter liquid helium dewar

SHUKLA, Vinit	29-INVESTIGATION OF CRYOGENIC SAFETY DISCHARGE EVENT OF MULTIPLE SYSTEMS TO A COMMON RELIEF HEADER

SIKDAR, Arindam Kumar	113-Design and characterization of a low noise amplifier operating at cryogenic temperature

SINGH, Fouran	112-A 4.2K to 400K control temperature cycling system and integration with automatic measurement algorithms of temperature vs electrical transport parameters

SINGH, PANKAJ	90-STUDY AND MINIMIZATION OF VIBRATION INDUCED IN A MINIATURE INTEGRAL CRANK DRIVEN STIRLING CRYOCOOLER

SINGH, RAJENDER	69-Low temperature magnetic properties of Cu-Zn ferrite thin films 78-Low temperature magnetic properties of ferrimagnetic and ferroelectric composites

SINGH, Trilok	9-Design of gas foil thrust bearing for vertically operated turboexpander used in cryogenic application

SKARIA, Mathew	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K 48-DESIGN, DEVELOPMENT AND STUDIES ON A LIQUID NITROGEN BASED CRYOSOPTION PUMP 49-DEVELOPMENT OF AN EXPERIMENTAL SETUP FOR EFFECTIVE THERMAL CONDUCTIVITY STUDIES OF INSULATIONS BETWEEN 77K AND 300K

SOM, Sumit	171-Invited Talk-IT: 'Design and development status of low-beta 650 MHz Superconducting RF Cavity"

SONARA, Dasarath	27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

SONARA, Dashrath	17-Instrumentation and Control Aspects of MgB2 Current leads Test Activities 37-SCIENTIFIC SOFTWARE TOOL FOR CALCULATION OF STATIC HEAT LEAK AND MATERIALS SPECIFIC HEAT FOR CRYOGENIC APPLICATIONS

SONI, Vijay	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

SONI, Vijay	59-STRESS ANALYSIS OF CRYOGENIC SUPPORT STRUCRTURE OF SUPERCONDUCTING MRI MAGNET CRYOSTAT 60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET 61-ANALYSIS OF 3D-STRESS IN A 1.5 T SUPERCONDUCTING MRI MAGNET 62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi 112-A 4.2K to 400K control temperature cycling system and integration with automatic measurement algorithms of temperature vs electrical transport parameters

SRIDHARAN, Arunkumar	28-Cryogenic chill down phenomena in horizontal tube with liquid nitrogen

SRINIVASAN, K V	12-Thermal Analysis and Investigations on Design Aspects of Aluminum alloy based Liquid Helium Dewar

SRINIVASAN, K V	13-Design and Development of Helium Gas Purifier

SRINIVASAN, K. V	35-Analysis of sintered porous regenerator of Stirling cryocooler using numerical technique

SRINIVASAN, K.V.	65-Design, Analysis and Fabrication of Liquid Nitrogen Transfer-line.

SRINIVASAN, KV	25-Design and development of LN2 subcooler for TIFR Mumbai

SUDHEER, T.	123-Experimental Investigations on Power frequency Electrical Breakdown Characteristics of Liquid Nitrogen for HTS power devices 124-Design aspects of High Temperature Superconducting (HTS) Synchronous Motors - A Review

SUMAN, Navneet	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

SUMAN, Navneet Kumar	59-STRESS ANALYSIS OF CRYOGENIC SUPPORT STRUCRTURE OF SUPERCONDUCTING MRI MAGNET CRYOSTAT 61-ANALYSIS OF 3D-STRESS IN A 1.5 T SUPERCONDUCTING MRI MAGNET 62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi

SUMAN, NAVNEET	60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET

SURESH, Babu	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

SUSHMITHA, T	122-Superconducting Magnetic Energy Storage for improving the performance of Wind Energy conversion systems

T H, Rahuldas	42-Effect of bottom heating on thermal stratification and self-pressurization in a cryogenic tank

T KUZHIVELI, Biju	88-THERMODYNAMIC STUDY OF MINIATURE ROTARY INTEGRAL STIRLING CRYOCOOLER

T KUZHIVELI, Biju	90-STUDY AND MINIMIZATION OF VIBRATION INDUCED IN A MINIATURE INTEGRAL CRANK DRIVEN STIRLING CRYOCOOLER

TANNA, V. L.	138-Invited Talk-IT "SST-1 CRYOGENICS SYSTEM AND RELAVENT CRYO FACILITIES"

TANNA, Vipul	15-Thermal Performance Enhancement of Liquid Nitrogen Distribution System of SST-1 16-Design and fabrication of Vacuum Jacketed Transfer Line for Helium Services 17-Instrumentation and Control Aspects of MgB2 Current leads Test Activities 27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS 37-SCIENTIFIC SOFTWARE TOOL FOR CALCULATION OF STATIC HEAT LEAK AND MATERIALS SPECIFIC HEAT FOR CRYOGENIC APPLICATIONS

TEJ TRIVEDI, Tej	104-A prototype experiment on Cryocooler based Cryopump

TENDOLKAR, Mandar	12-Thermal Analysis and Investigations on Design Aspects of Aluminum alloy based Liquid Helium Dewar 25-Design and development of LN2 subcooler for TIFR Mumbai

TENDOLKAR, Mandar	13-Design and Development of Helium Gas Purifier

THADELA, Sudheer	86-Development of a lab-scale YBCO based High-Tc Superconducting Power cable

THAKUR, Sajjan Kumar	100-Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet and qualification at liquid nitrogen temperature

THEKKETHIL, Sankar Ram	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

THEKKETHIL, Sankar Ram	59-STRESS ANALYSIS OF CRYOGENIC SUPPORT STRUCRTURE OF SUPERCONDUCTING MRI MAGNET CRYOSTAT 60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET 61-ANALYSIS OF 3D-STRESS IN A 1.5 T SUPERCONDUCTING MRI MAGNET 62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi

THOMAS, Rijo Jacob	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K 48-DESIGN, DEVELOPMENT AND STUDIES ON A LIQUID NITROGEN BASED CRYOSOPTION PUMP 49-DEVELOPMENT OF AN EXPERIMENTAL SETUP FOR EFFECTIVE THERMAL CONDUCTIVITY STUDIES OF INSULATIONS BETWEEN 77K AND 300K

THUMMAR, P	128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION

TIWARI, Ankit	18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES 19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

TIWARI, Awadhesh Mani	20-Measurement of Magnetocardiogram in unshielded environment

TRIMBAKE, Amol	65-Design, Analysis and Fabrication of Liquid Nitrogen Transfer-line.

V, Boopathi	45-DESIGN AND DEVELOPMENT OF LOW CAPACITY TWIN BED SILICA GEL–WATER ADSORPTION REFRIGERATION SYSTEM

V M, ABHIROOP	115-Experimental investigations on chill down along packed spherical bed regenerator 116-Numerical investigations on the pressure drop characteristics along a compact regenerator

V V, Rao	86-Development of a lab-scale YBCO based High-Tc Superconducting Power cable

V.K, Pavan	5-Wear properties of Polytetrafluoroethylene (PTFE) at cryogenic temperatures

VAGHELA, Hitensinh	29-INVESTIGATION OF CRYOGENIC SAFETY DISCHARGE EVENT OF MULTIPLE SYSTEMS TO A COMMON RELIEF HEADER

VAGHELA, Hitensinh	50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS

VAIDHYANATHAN, L. S.	26-Oscillation of Tc in Pr0.5Ca0.5MnO3/YBa2Cu3O7-δ Multilayer

VASU, AMAL	85-Performance Analysis of Cryogenic CO2 Capture Methods employed in Post Combustion Systems

VASUDEVAN, K.	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K 48-DESIGN, DEVELOPMENT AND STUDIES ON A LIQUID NITROGEN BASED CRYOSOPTION PUMP 49-DEVELOPMENT OF AN EXPERIMENTAL SETUP FOR EFFECTIVE THERMAL CONDUCTIVITY STUDIES OF INSULATIONS BETWEEN 77K AND 300K

VERMA, Dharmesh	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

VERMA, Ravi	101-Studies on thermal conductivity of epoxy-aluminium composites in the range of 300 K to 4.5 K for the development of cryosorption pumps

VERMA, Vinesh	4-Detection of quench location in 1.3 GHz single cell SCRF Cavity during cold testing in LHe bath at 2K

VISHNU, P.	48-DESIGN, DEVELOPMENT AND STUDIES ON A LIQUID NITROGEN BASED CRYOSOPTION PUMP

VYAS, H	128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION 128-DEVLOPMENT OF CHARCOAL ADSORPTION CHARACTERIZATION TEST FACILITY FOR LOW TEMPERATURE HELIUM GAS PURIFICATION

VYAS, Hardik	57-Design of Nitrogen Cryolines for ITER

VYAS, Hardik	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

YADAV, Anand	4-Detection of quench location in 1.3 GHz single cell SCRF Cavity during cold testing in LHe bath at 2K

YADAV, Vipin Kumar	33-Application of thermoacoustic devices in cryogenic systems: A review since the year 2000 74-DESIGN AND DEVELOPMENT OF A HIGH SPEED ROTARY VALVE FOR OPERATION IN A PRESSURE WAVE REFRIGERATOR

YEDLE, Ajay	4-Detection of quench location in 1.3 GHz single cell SCRF Cavity during cold testing in LHe bath at 2K

ZVYAGINTSEV, V.	178-Online quality factor measurement of the SRF cavity in Injector Cryo-Module of VECC Electron Linac