Home > Author Index
Display options
View mode    
 
Authors
a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z | [all]
 
G J, Bharath

93-Development and experimental studies on flexible transfer lines for liquid helium application

 
G, L.N.SRIKANTH

16-Design and fabrication of Vacuum Jacketed Transfer Line for Helium Services

 
G. L. N., Srikanth

27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

 
GANGRADEY, Ranjana

44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K

101-Studies on thermal conductivity of epoxy-aluminium composites in the range of 300 K to 4.5 K for the development of cryosorption pumps

 
GANGRADEY, Ranjana

70-Large Pumping Speed Pump: To pump Space Simulators & Fusion Reactors

71-THERMOHYDRAULIC ANALYSIS OF HYDROFORMED THERMAL SHROUDS

 
GARDE, Aditya

30-Cryogenic setup for calibration of temperature sensors

 
GARDE, Chandrashekhar

30-Cryogenic setup for calibration of temperature sensors

65-Design, Analysis and Fabrication of Liquid Nitrogen Transfer-line.

 
GARG, Anuj

1-Optimized filling of a 5000 liter liquid helium dewar

 
GARG, Atul

15-Thermal Performance Enhancement of Liquid Nitrogen Distribution System of SST-1

27-HELIUM INVENTORY MANAGEMENT, QUALITY CONTROL AND HELIUM LOSSES DURING SST-1 CRYOPLANT OPERATIONS

 
GAUR, Vikas

50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS

1-Optimized filling of a 5000 liter liquid helium dewar

 
GEHANI, Vijay

57-Design of Nitrogen Cryolines for ITER

 
GEHANI, Vijay

98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

 
GEORGE, Paul

5-Wear properties of Polytetrafluoroethylene (PTFE) at cryogenic temperatures

 
GHOSH, Indranil

67-A precursory analysis of cryogenic radiant coolers with open-cell metallic foam fins

103-Cryosorption storage of hydrogen in activated carbon: finite element analysis

 
GHOSH, J

179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

 
GHOSH, Koushik

111-CFD Modeling of two-phase flow of cryogenic fluids in the Slug Flow regime in a Microchannel

 
GHOSH, P S

131-CFD analysis of high speed cryogenic helium turboexpander with splitter blades

 
GHOSH, P. S.

153-Invited Talk: IT: "LNG TECHNOLOGY: PRESENT SCENARIO AND FUTURE POSSIBILITIES IN INDIA"

 
GHOSH, Parthasarathi

80-NUMERICAL MODELING OF CAVITATION IN CRYOGENIC FLUIDS USING OPENFOAM AND CFX

87-Numerical studies on turbine drive gas recovery at the LOX booster turbopump exit of a staged combustion cycle based rocket engine

 
GHOSH, Rupul

18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES

19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

 
GHOSH, S

179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

 
GHOSH, Subrata Kr.

97-Blade profile design of cryogenic turbine

 
GHOSH, Sundeep

187-OVERVIEW OF THE CRYOGENIC SYSTEM FOR VECC E-LINAC

 
GHOSH, Tamal

100-Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet and qualification at liquid nitrogen temperature

 
GILANKAR, Shailesh

18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES

19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

 
GOUR, ABHAY

6-HTS based 400 mm level sensor for liquid Nitrogen

7-HTS level sensor with integrated Cold electronics

8-Capacitance level sensor with integrated Cold electronics

38-Design of 10 KA DC terminal connector for HTS cable

39-Design of magnetic shielding for 600 MWh SMES

 
GOYAL, Mukesh

137-Invited Talk-IT: "Turboexpander based helium liquefier/ refrigerator development at BARC, India"

 
GRILLOT, D.

11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

 
GRILLOT, David

50-STRUCTURAL DESIGN OF ITER CRYO-PLANT TERMINATION COLD BOX UNDER EXTREME CONDITIONS

57-Design of Nitrogen Cryolines for ITER

107-Dynamic study of flow in quench lines for ITER

 
GRILLOT, David

98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

 
GUPTA, Anjan K

22-Fabrication and characterization of micron size superconducting quantum interference devices (μ-SQUIDs) of lead (Pb)

 
GUPTA, Prabhat Kumar

73-Design and development of 2 Kelvin J-T heat exchanger

 
GUPTA, SUDEEP

74-DESIGN AND DEVELOPMENT OF A HIGH SPEED ROTARY VALVE FOR OPERATION IN A PRESSURE WAVE REFRIGERATOR

 
GUPTA, Sudeep Kumar

33-Application of thermoacoustic devices in cryogenic systems: A review since the year 2000

 
GUPTA, Sudeep

31-Design analysis and development of a thermoacoustic engine